Foscam Fi9820w
Thinking of that you are paying out less than $100 for any wireless IP Digicam that provides PT (no Zoom), infrared night vision, motion detection, and automatic e-mail of alarm pictures, there is certainly pretty tiny a single could condemn about this camera. Yes, it really is difficult to set-up in case you have under no circumstances performed port-forwarding ahead of and yes, the frame rate and resolution are each just a little low, as well as the audio is crap, but remember that you paid less than $100 for this factor. If you need audio, higher frame prices and greater resolution, you ought to obtain a far more pricey IP camera.
As far as setup goes, if you realize networking and port-forwarding, these are my suggestions:
1) Do not set up the software around the CD.
two) Connect the camera by Cat-5 wire to your router.
three) Login to your router (by way of browser) and locate the IP address assigned for your camera.
4) Login to the video camera at that IP address (via browser) and Immediately turn OFF the DHCP.
5) Give your digital camera a fixed IP address on your network and fill inside the subnet mask with the you usually use.
6) The Gateway and DNS fields must usually be the IP address of your router.
7) Fill in the SSID, encryption form, and share essential utilized by your wireless network.
eight) Pick a four digit number to utilize for the HTTP port quantity. (I've no notion what "Network Lamp" is so I left it checked.)
9) Disconnect the Cat-5 cable and re-boot the camera.
ten) Re-login for the camera at the new fixed IP address to verify that everything's operating.
11) Login for your router and set a port-forwarding entry to map towards the fixed IP address and HTTP port you gave your camera.
12) Make use of the "What's My IP" web site to discover your outdoors IP address.
13) Enter your outdoors IP address and HTTP port number into a browser and verify that you can get into the camera from outdoors your home.
14) You're accomplished.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น